A centrifugal clutch is a clutch that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. It engages more at higher speeds. The input of the clutch is connected to the engine crankshaft while the output may drive a shaft, chain, or belt.
A cone clutch serves the same purpose as a disk or plate clutch. However, instead of mating two spinning disks, the cone clutch uses two conical surfaces to transmit torque by friction. The cone clutch transfers a higher torque than plate or disk clutches of the same size due to the wedging action and increased surface area.
A dog clutch is a type of clutch that couples two rotating shafts or other rotating components not by friction but by interference. The two parts of the clutch are designed such that one will push the other, causing both to rotate at the same speed and will never slip.
A hydraulic clutch works on the same basic principle, but it differs from its mechanical counterpart in that it has fewer components. This type of clutch has a reservoir containing hydraulic fluid, and when you push down on the clutch pedal, the fluid becomes pressurized.
Hypoid gearboxes are a type of spiral bevel gearbox, with the difference that hypoid gears have axes that are non-intersecting and not parallel. Hypoid gearboxes are a type of spiral bevel gearbox, with the difference that hypoid gears have axes that are non-intersecting and not parallel.
Planetary gears and the automatic transmission The basis of your automatic transmission is what is known as a planetary, or epicycloidal, gear set. This is what allows you to change your car gear ratio without having to engage or disengage a clutch.
Safety clutches provide reliable protection and ensure: ... the load holding frictionally-locking safety clutch Performance Characteristics Slipping on overload. The device can continue operation immediately after elimination of the overload Torque transmission due to frictional locking Simple to install and handle Torque can be adjusted easily and steplessly using adjustment tables High ...
Spiral Bevel Gearbox: The Z-Series offers 7 sizes, 6 models, and 9 ratios, with various input-output arrangements and universal mounting capability. Spiral Bevel Gearbox: The Z-Series offers 7 sizes, 6 models, and 9 ratios, with various input-output arrangements and universal mounting capability.
Spur Gearboxes with a backlash in the range of 30 arc-minutes may cost as low as $500. The cost for spur gearboxes with a backlash value under 5 arc-minutes will cost more than spur gearboxes with high backlash values. Below is a list of gearbox products offered by Anaheim Automation.