Anchor Bend. https://www.netknots.com/rope_knots/double-fishermans. How to tie the Anchor Bend. The Anchor Bend or Anchor Hitch is the knot generally used to fasten a line to an anchor. The free end should be secured with seizing to the standing line for a permanent, secure knot.
Ashley Bend Details. Uses: The Ashley Bend is the name now given to a knot described by Ashley merely by number (ABOK # 1452). It is one in a family of knots based on interlocking overhand knots. It is used to join two ropes of roughly similar size. Testing by Ashley indicated that it was a reliable knot with very little tendency to slip.
Blake's Hitch Details. Uses: Blake's Hitch is a Friction, or Slide and Grip, hitch. It is used by arborists for ascent and descent. Like other Slide and Grip Knots, the strain should only be taken on the line below the hitch.
Bowline Knot Details Uses: The Bowline (ABOK # 1010, p 186) makes a reasonably secure loop in the end of a piece of rope. It has many uses, e.g., to fasten a mooring line to a ring or a post.
In the middle of a piece of rope, form a bight. Make a loop and pass the end of the bight through it. Open up the bight and bring it around the entire knot until it encircles both standing ends. Tighten to complete the knot ...
Buntline hitch. The buntline hitch is a knot used for attaching a rope to an object. It is formed by passing the working end around an object, then making a clove hitch around the rope's standing part, taking care that the turns of the clove hitch progress towards the object rather than away from it.
The butterfly loop, also known as lineman's loop, butterfly knot, alpine butterfly knot and lineman's rider, is a knot used to form a fixed loop in the middle of a rope. Tied in the bight, it can be made in a rope without access to either of the ends; this is a distinct advantage when working with long climbing ropes.
Carrick Bend Details. Uses: The Carrick Bend (ABOK # 1439, p 263) joins two ropes together. Ashley describes it as "the bend commonly tied in hawsers and cables." It is also makes the center of the very decorative Lanyard Knot.
Cat's paw (knot) The Cat's paw is a knot used for connecting a rope to an object. It is very similar to the cow hitch except there is an additional twist on each side of the bight, making it less prone to slipping. The cat's-paw is the common hook hitch for slings.
Clove Hitch. A simple all-purpose hitch. Easy to tie and untie. A useful and easy to tie knot, the Clove Hitch is a good binding knot. However, as a hitch it should be used with caution because it can slip or come undone if the object it is tied to rotates or if constant pressure is not maintained on the line.
The constrictor knot is one of the most effective binding knots. Simple and secure, it is a harsh knot that can be difficult or impossible to untie once tightened. It is made similarly to a clove hitch but with one end passed under the other, forming an overhand knot under a riding turn. The double constrictor knot is an even more robust variation that features two riding turns.
The cow hitch is a hitch knot used to attach a rope to an object. The cow hitch comprises a pair of half-hitches tied in opposing directions, as compared to the clove hitch in which the half-hitches are tied in the same direction.
Double Fisherman's, or Grapevine Bend, Details Structure: The Double Fisherman's, or Grapevine, Bend (ABOK # 294, p 50.) consists of two Strangle Knots (like double overhand knots) each tied round the other standing end. However, because it is created around another line, this structure may not be obvious.
The double overhand knot is simply a logical extension of the regular overhand knot, made with one additional pass. The result is slightly larger and more difficult to untie. It forms the first part of the surgeon's knot and both sides of a double fisherman's knot.
The figure-eight knot or figure-of-eight knot is a type of stopper knot. It is very important in both sailing and rock climbing as a method of stopping ropes from running out of retaining devices.
The Half Hitch – attaches a rope to something, e.g., a Hitching Post; The Half Knot – a binding knot – first part of a Square (Reef) Knot. Tying it: As shown in the animation it can be capsized from looking like an overhand knot into the normal look of a Half Hitch.
Icicle Hitch Using the End Details Structure: The Icicle Hitch appears to be almost identical to the knot described by Ashley to hoist a spar (ABOK # 1762, p 299) and to the Klemheist. The only difference is that the other knots are tied using a loop of rope.
Klemheist (Machard) Knot Tying Use a piece of cord formed into a loop. Pass the loop around the main rope. Make three complete turns, laying each turn on neatly.
Monkey's Fist Tying Wrap three turns around your fingers (metal here). Pass the end through the middle. Make three more turns around the first ones. Pass the end through the middle. Make three more turns locking the previous turns and remove fingers. Tie a knot in the end and tuck it into the center. Then tighten every turn.
Munter Hitch. The Munter Hitch provides a method for belaying and rappelling without a belay/rappel device. This is an important knot for climbers to know.
Overhand Knot Tying Details. Uses: The Overhand Knot was described by Ashley (ABOK # 46, p 14) as "the simplest of the Single-Strand Stopper Knots." It can also be used to prevent the end of a piece of rope unraveling.
The Prusik knot is a friction hitch commonly used in rope rescue, mountaineering, climbing, canyoneering, and more. It is easy to make on the go, making it a go-to knot for enthusiasts and professionals alike. In this guide, we will explain how to make a Prusik hitch and different ways to apply it in your adventures.
First Knot: The Square (Reef) Knot (ABOK # 1402, p 258) is usually learned when we tie the laces on our first pair of shoes. Admittedly it is usually a bow that we tie - but the underlying knot is a Square (Reef) Knot. We also learn just how unsatisfactory the knot is. It slips, it comes undone, it ...
Rolling Hitch Tying Pass the end around the main (red) rope to make a Half Hitch. Continue around going over the first turn. Tuck the rope between the standing end and the first turn. Tighten to make it secure (this introduces a slight dog-leg in the main rope). Continue around to add a final Half Hitch.
Uses: The Running Bowline (ABOK # 1117, p 204) is a valuable way of tying a type of noose which will not bind and can be slid undone easily. In boating it is recommended for use when retrieving lumber or rigging which has fallen overboard and in climbing for retrieving objects in places such as crevasses.
A shank is a type of knot that is used to shorten a rope or take up slack, such as the sheepshank. The sheepshank knot is not stable. It will fall apart under too much load or too little load.
Double Sheet Bend: When the ropes are ... Making a Net with Sheet, or Carrick, ... The image on the left shows the two knots that are most commonly used at each ...
Slip Knot Tying Form a loop in the end of the rope. Prepare a bight in the short end. Tuck the bight through the loop and tighten. The knot can be used as temporary stopper knot.
The Tautline Hitch is essentially a Rolling Hitch tied on the standing part of a tight line after it has been secured around a object. Campers like to use this knot to secure tent guy lines because the hitch slides freely, yet jams under load, making adjustments to the line easy.
Timber Hitch Tying Pass the end of the rope around the pole and then around the standing end. Wrap the end around itself three times and tighten the knot so that the three turns are gripped against the pole.
Use the Trucker’s Hitch to cinch down a load. This combination of knots allows a line to be pulled verytight. Probably the most useful hitch there is, the Trucker’s Hitch allows a line to be pulled tight as a guitar string and secured.
The knot should be arranged neatly and pulled tight. Other Names: The Water Knot is also known by various other names including: Tape Knot, Ring Bend, Grass Knot, and Overhand Follow-Through. Uses: In climbing it is used to join two pieces of webbing strapping.
Welcome to Animated Knots by Grog. World #1 Knot Site. ... Common Whipping Tying Lay the twine against the rope and wrap the long end around the rope about 8 turns.
Zeppelin Bend Details. Uses: The Zeppelin Bend is one of the bends employing interlocking overhand knots. It is a reliable bend that can be untied even after being heavily loaded but not, however, while still under load. It is an excellent alternative to the more widely used Double Fisherman's because it eliminates the risk of jamming.